{"id":11127,"date":"2024-04-23T08:58:22","date_gmt":"2024-04-23T06:58:22","guid":{"rendered":"https:\/\/blog.federnshop.com\/tolerances-compression-springs\/"},"modified":"2024-04-23T17:45:58","modified_gmt":"2024-04-23T15:45:58","slug":"tolerances-compression-springs","status":"publish","type":"post","link":"https:\/\/blog.federnshop.com\/en\/tolerances-compression-springs\/","title":{"rendered":"Tolerances compression springs"},"content":{"rendered":"

\"PressureThe tolerances for compression springs<\/a> are defined in accordance with DIN 2095 (DIN EN 15800). Quality grade 1 describes the smallest tolerance zone (higher product price) and quality grade 3 the largest tolerance zone. Our compression springs are manufactured to grade 2 (medium tolerance range) as standard.<\/p>\n

For compression springs, the coil diameter [Di, D, De], the deviation of the surface line [e1] and parallelism [e2], the untensioned length [L0] and the spring forces<\/a> [F1, F2] are tolerated. DIN 2095 provides tolerance specifications in tabular form for the winding diameter and the deviation of the sheath line and parallelism. The tolerance values for the untensioned length [L0] and spring forces [F1, F2] are calculated on the basis of coulter diagrams. The tolerance calculation can be carried out using the Gutekunst spring calculation program<\/a>.<\/p>\n

 <\/p>\n

\n
\n

Table of Contents<\/p>\n<\/span><\/div>\n