News und Informationen rundem Metallfedern
Whether in cooling systems, in space or other low temperature applications. Metal springs often have to withstand temperatures of up to – 200 degrees. Despite rising tensile strenght low temperatures have an unfavorable effect on the material, as the toughness
To absorb forces and movements are sometimes also Spring systems used. Due to the different arrangement of Compression springs A wide variety of force properties can be generated. Simple spring systems are: Compression springs parallel connection The springs are arranged
The level of the working temperature can significantly influence the function of a metal spring, as the tendency to Relaxation increases with increasing temperature. table : Limit temperatures from Spring materials with minimal relaxation material Maximum working temperature in °
Whether in corrosive liquids, at High temperature applications or at lowest temperatures , with dynamic or static loads, compressive, tensile or bending loads: With the Design of the metal spring in extreme cases there is more to be done than
Exceeds when the spring is loaded Shear stress the permissible value, a permanent deformation occurs, which manifests itself in the reduction of the unstressed length “L0”. This process is called “setting” in spring technology, which is associated with the properties
Every spring design of a compression spring consists of two stages : 1. The proof of function, with the verification of the dimensions, spring rate, forces, spring travel and vibration behavior. 2. The proof of strength, with the verification of