News und Informationen rundem Metallfedern
mit 12.603 Baugrössen
für Druck-, Zug- und Schenkelfedern
erstellen und herunterladen
individuell bis 12 mm Drahtstärke
Always the right compression spring, extension spring and torsion spring – from the quick spring selection in the catalog, to the design and calculation of individual metal springs, to the CAD data generator for standard springs and freely calculated metal
Compression springs, extension springs and torsion springs are typical C-parts for most companies: They are not the focus of the procurement process, but are used in almost all technical applications. The requirements for the springs are very versatile and individual.
Selecting the right metal spring for the desired application is not always easy. In many technical books with constructional basics, the subject of springs is treated in a very general way. If you are looking for a standard spring, you
Before interpreting the Compression spring It should basically be clarified whether the intended type of stress is static, quasi-static or dynamic. Static or quasi-static stress Time-constant (resting) load or time-changing load with less than 10,000 strokes in total or small
Hookesche’s law describes the elastic deformation of solids in a linear special case of the Elasticity Act. In this process, the elastic force of the body changes with stretching or squeezing. When applying compression springs, extension springs and torsion springs
With conical compression springs, the diameter of the changes Design towards the ends, that is, gets bigger or smaller. They are mainly used when the installation space is limited in the axial direction. The specialty: the coils of conical compression
Safety elements are small, almost inconspicuous machine components that are used in almost every construction. The form-fitting components act as guide elements to protect and limit other machine parts against axial play. The security elements are available in many designs.
the Spring rate , also called spring constant or spring stiffness, depends on the material and shape of the spring. The calculation formula for cylindrical springs made of round wire with a linear spring characteristic is as follows: Compression spring
The spring constant describes at Compression springs , Tension springs and Torsion springs the increase in force in relation to the Suspension travel , or with torsion springs in relation to the angle of rotation. It is also called Spring
What does the Relaxation with metal springs? This has little to do with a recovery phase of the spring, but describes the unintentional increasing loss of force of the spring with increasing ambient temperature and duration of load. Or what