News und Informationen rundem Metallfedern
Before interpreting the Compression spring It should basically be clarified whether the intended type of stress is static, quasi-static or dynamic. Static or quasi-static stress Time-constant (resting) load or time-changing load with less than 10,000 strokes in total or small
The spring rate, also called spring constant or spring hardness, depends on the spring material and the shape of the compression spring, extension spring or torsion spring. The formula for calculating the spring rate for cylindrical springs made of round
Compression springs, extension springs and torsion springs are typical C-parts: They are not the focus of the procurement process, but are installed in almost all technical applications. The requirements for the spring design are very versatile and individual. Compressive, tensile
Always the right compression spring, extension spring and torsion spring – from the quick spring selection in the catalog, to the design and calculation of individual metal springs, to the CAD data generator for standard springs and freely calculated metal
Compression springs, extension springs and torsion springs are typical C-parts for most companies: They are not the focus of the procurement process, but are used in almost all technical applications. The requirements for the springs are very versatile and individual.
Selecting the right metal spring for the desired application is not always easy. In many technical books with constructional basics, the subject of springs is treated in a very general way. If you are looking for a standard spring, you
Every spring design of a compression spring consists of two stages : 1. The proof of function, with the verification of the dimensions, spring rate, forces, spring travel and vibration behavior. 2. The proof of strength, with the verification of
What is shot peening? Shot peening is a special kind of Surface treatment . In the process, blasting media are accelerated in special systems and hit the surface of the workpieces to be processed, such as Metal springs , steered.
The Goodman diagram enables the representation of the Fatigue strength of coil springs. It can be traced back to the Smith chart. This is used to calculate the fatigue strength of dynamically stressed components where the load is pulsating or
Today’s designers work exclusively with CAD programs. That reinforces the trend too Standard springs . The CAD data is already available here, the designers lose no time: Simply go to the provider’s website, download the data and import it into